0 |
Reserved |
|
1 |
Unspecified reason not covered by other failure codes. |
[RFC3292] |
2 |
Invalid request message. |
[RFC3292] |
3 |
The specified request is not implemented on this switch. |
[RFC3292] |
4 |
One or more of the specified ports does not exist. |
[RFC3292] |
5 |
Invalid Port Session Number. |
[RFC3292] |
6 |
One or more of the specified ports is down. |
[RFC3292] |
7 |
Invalid Partition ID. |
[RFC3292] |
8-9 |
Unassigned |
|
10 |
General message failure. (The meaning of this
failure code depends upon the Message Type. It is
defined within the description of any message that
uses it.) |
[RFC3292] |
11 |
The specified connection does not exist |
[RFC3292] |
12 |
The specified branch does not exist. |
[RFC3292] |
13 |
One or more of the specified Input Labels is invalid |
[RFC3292] |
14 |
One or more of the specified Output Labels is invalid. |
[RFC3292] |
15 |
Point-to-point bi-directional connection already exists. |
[RFC3292] |
16 |
Invalid service selector field in a connection
management message. |
[RFC3292] |
17 |
Insufficient resources for QoS profile. |
[RFC3292] |
18 |
Insufficient resources. |
[RFC3292] |
19 |
Out of resources (e.g. memory exhausted, etc.). |
[RFC3292] |
20 |
Reservation ID out of Range |
[RFC3292] |
21 |
Mismatched reservation ports |
[RFC3292] |
22 |
Reservation ID in use |
[RFC3292] |
23 |
Non-existent reservation ID |
[RFC3292] |
24 |
ATM virtual path switching is not supported on
this input port. |
[RFC3292] |
25 |
Point-to-multipoint ATM virtual path connections
are not supported on either the requested input
port or the requested output port. |
[RFC3292] |
26 |
Attempt to add an ATM virtual path connection
branch to an existing virtual channel connection. |
[RFC3292] |
27 |
Attempt to add an ATM virtual channel connection
branch to an existing virtual path connection. |
[RFC3292] |
28 |
ATM Virtual Path switching is not supported on
non-ATM ports. |
[RFC3292] |
29 |
A branch belonging to the specified point-to-
multipoint connection is already established on the
specified output port and the switch cannot support
more than a single branch of any point-to-multipoint
connection on the same output port. |
[RFC3292] |
30 |
The limit on the maximum number of point-to-
multipoint connections that the switch can support
has been reached. |
[RFC3292] |
31 |
The limit on the maximum number of branches that
the specified point-to-multipoint connection can
support has been reached. |
[RFC3292] |
32 |
Cannot label each output branch of a point-to-multipoint
tree with a different label. |
[RFC3292] |
33 |
Cannot add multi-point branch to bi-directional
connection. |
[RFC3292] |
34 |
Unable to assign the requested Label value to the
requested branch on the specified point-to-multipoint
connection. |
[RFC3292] |
35 |
General problem related to the manner in which
point-to-multipoint is supported by the switch. |
[RFC3292] |
36 |
Replace of connection is not activated on switch. |
[RFC3292] |
37 |
Connection replacement mode cannot be combined
with Bi-directional or Multicast mode. |
[RFC3292] |
40 |
Cannot support one or more requested label ranges. |
[RFC3292] |
41 |
Cannot support disjoint label ranges. |
[RFC3292] |
42 |
Specialised multipoint labels not supported. |
[RFC3292] |
43 |
The transmit data rate of this output port cannot
be changed. |
[RFC3292] |
44 |
Requested transmit data rate out of range for this
output port. |
[RFC3292] |
45 |
Connection Replace mechanism not supported on switch. |
[RFC3292] |
46 |
Labels are still used in the existing Label Range. |
[RFC3292] |
47-59 |
Unassigned |
|
60-79 |
Reserved for Vendor Private Extensions |
[RFC3292] |
80 |
Switch does not support different QoS parameters
for different branches within a multipoint connection. |
[RFC3292] |
81-127 |
Unassigned |
|
128-159 |
Reserved for Vendor Private Extensions |
[RFC3292] |
160-255 |
Unassigned |
|